HF-DZ25-6L
Characteristic
Easy operation, change tube rapidly. The house material is aluminum alloy or PPS (polyphenylene sulfite). 304 stainless steel rollers. HF-DZ25 pump head use 2.4mm wall thickness tube, the flow rate range is 0.3-6000ml/min. This pump head is suitable for high viscous liquid which include granule and floc. It also suitable for high pressure request. New cartridge structure design, can use the special connector, connect low cost tubing outside the pump head to save cost; also can use flexible tube card, meet hygiene requirement.
- Cartridge and bases body is separated, it is convenient to change the tubing
- The structure design, can use both the special connector and the flexible tube card
- Wide flow rate range, accept 15#, 24#, 35# and 36# tubing
Industry application
Industry machine supporting
Biological fermentation tank matching
Tubing Installation Procedure
- 1. Lift both side levers, take off the upper block.
- 2. Put the tubing with cartridge or connector into pump housing.
- 3. Install the upper block, put down the levers to lock the block.
HF-DZ25-3L: the tubing lenght is 90mm between both tubing clamps
HF-DZ25-6L: the tubing lenght is 125mm between both tubing clamps
Product Composition and Flow Rate Range
| Model No. | Housing Material | Tubing Sizes | IDxWall thickness (mm) | Tubing Clamp Material | Flow rate (ml/min) 0.1-600rpm | Weight (kg) |
|---|---|---|---|---|---|---|
|
HF-DZ25-6L |
PPS |
15# |
4.8x2.4 |
PP |
0.3-1800 |
0.85 |
|
HF-DZ25-6L |
PPS |
24# |
6.4x2.4 |
PP |
0.55-3300 |
0.85 |
|
HF-DZ25-6L |
PPS |
35# |
7.9x2.4 |
PP |
0.8-4800 |
0.85 |
|
HF-DZ25-6L |
PPS |
36# |
9.6x2.4 |
PP |
1-6000 |
0.85 |
Product Dimension Drawing (mm)
