57 Stepper motor

HF-MiniPump series products which adopt compact and embedded design are more suitable for supporting a variety of instruments and equipments. Single and dual channel are optional. It accepts 8 kinds of tubing. Flow rates are 0.0024-190ml/min. PhaMed PBT long-life tubing is installed in internal part of pump head. Applicable for HF-MiniPump are stepper motor, DC motor, AC motor and other modes to drive with wide applications.

Characteristic

Industry application

Analytical intruments

Environmental protection equipment

Tubing Installation Procedure

    1. Make the two tubing clamps align the slide way of pump head two sides.
    2.  Ensure that the tubing is in the middle of rollers, and push the clamps into the pump head.
    3.  Make the compression block align the upper slide way of pump head.
    4.  Press the compression block into the pump head, and ensure it fixed.

The way of connection tube

Application

Pump Head and Flow Rate

Pump Head Tubing IDxWall thickness (mm) Speed (rpm) Flow Rate (ml/min)
HF-MiniPump01
13#
0.8×1.6
0.1-300
0.0024-8.28
HF-MiniPump01
14#
1.6×1.6
0.1-300
0.0112-33.88
HF-MiniPump01
19#
2.4×1.6
0.1-300
0.0252-77.23
HF-MiniPump01
16#
3.1×1.6
0.1-300
0.0394-114.31
HF-MiniPump01
25#
4.8×1.6
0.1-300
0.0652-190.00
HF-MiniPump01
1×1
1×1
0.1-300
0.005-15.01
HF-MiniPump01
2×1
2×1
0.1-300
0.018-54.63
HF-MiniPump01
2.5×1
2.5×1
0.1-300
0.0256-76.84
HF-MiniPump01
3×1
3×1
0.1-300
0.0356-108.39
HF-MiniPump02
1×1
1×1
0.1-300
0.005-15.01
HF-MiniPump02
2×1
2×1
0.1-300
0.018-54.63
HF-MiniPump02
2.5×1
2.5×1
0.1-300
0.0256-76.84

Dual Channel. Flow rate (ml/min) and Tubing (1mm wall thickness)

Motor speed ID 1mm ID 2mm ID 2.5mm ID 3mm
5
0.25
0.90
1.28
1.78
10
0.49
1.84
2.59
3.52
15
0.74
2.76
3.85
5.30
25
1.25
4.57
6.43
8.80
40
2.00
7.31
10.25
14.02
50
2.52
9.14
12.78
17.47
75
3.76
13.64
19.04
26.12
100
5.03
18.17
25.42
35.34
200
10.12
36.45
51.27
71.44
250
12.63
45.75
64.34
88.35
300
15.01
54.63
76.84
108.39

Single Channel. Flow rate (ml/min) and Tubing (1.6mm wall thickness)

Motor speed ID 13# ID 0.8mm ID 14# ID 1.6mm ID 19# ID 2.4mm ID 16# ID 3.1mm ID 25# ID 4.8mm
5
0.12
0.56
1.26
1.97
3.26
10
0.26
1.15
2.53
3.90
6.41
15
0.39
1.74
3.80
5.80
9.52
25
0.66
2.88
6.31
9.59
15.74
40
1.08
4.59
10.11
15.29
25.15
50
1.34
5.69
12.62
18.96
31.14
75
2.00
8.54
18.93
28.36
46.55
100
2.73
11.37
25.27
37.66
61.98
200
5.46
22.76
50.82
76.02
124.14
250
6.81
28.40
65.39
95.08
153.63
300
8.28
33.88
77.23
114.31
190.00
Model No. OEM-B136
Speed range
0.1-300rpm
Flow rate range
0.0024-190 ml/min
Motor type
57 stepper motor
Speed control
Preset speed and manual control
Control mode
External passive signal level (normally closed or open) mode; control the start/stop of direction
Display (optional)
0-96″ OLED screen
Power supply
DC 24V, ≥50W
Working environment
0-40ºC, 80%RH
Model No. OEM-B137
Speed range
0.1-300rpm
Flow rate range
0.0024-190 ml/min
Motor type
57 stepper motor
Speed control
Pulse frequency speed control
Logic input voltage
5V, 12V, 24V, (default 5V)
Multiple segments
1/16 (recommend), 1, 1/2, 1/4, 1/8, 1/32, 1/64, 1/128
Power supply
DC 24V, ≥50W
Working environment
0-40ºC, 80%RH

Product Dimension Drawing (mm)