Closed-loop stepper motor

Easy operation, change tube rapidly. The house material is PPS (polyphenylene sulfite). 304 stainless steel rollers. HF-DZ25 pump head use 2.4mm wall thickness tube, the flow rate range is 0.211-6000ml/min. This pump head is suitable for high viscous liquid which include granule and floc. It also suitable for high pressure request. New cartridge structure design, can use the special connector, connect low cost tubing outside the pump head to save cost; also can use flexible tube clamp, meet hygiene requirement.

Characteristic

Industry application

Analytical instruments supporting

Widely used in industrial washing machines, dishwashers and fermentation tanks

Tubing Installation Procedure

    A. Lift both side levers, take off the upper block..
    B. Put the tubing with cartridge or connector into pump housing.
    C. Install the upper block, put down the levers to lock the block.

Pump Head and Flow Rate

Model No. Housing Material Base Protective cover Tubing sizes IDxWall Thickness Speed range (rpm) Flow Rate (ml/min) Weight (kg)
HF-DZ25-6L
Aluminum alloy/PPS
PP
15#
4.8×2.4
0.1-600
0.3~1800
1.86/0.86
HF-DZ25-6L
Aluminum alloy/PPS
PP
24#
6.4×2.4
0.1-600
0.55~3300
1.86/0.86
HF-DZ25-6L
Aluminum alloy/PPS
PP
35#
7.9×2.4
0.1-600
0.8~4800
1.86/0.86
HF-DZ25-6L
Aluminum alloy/PPS
PP
36#
9.6×2.4
0.1-600
1~6000
1.86/0.86
Model No. OEM-B508
Speed range
0.1-600rpm
Flow rate range
0.3-6000ml/min
Motor type
Closed-loop stepper motor
Motor phase number
2
Motor step angle
1.8º
Motor phase voltage
2V
Motor phase current
4.0A
Encoder power
5V
Working environment
0-40ºC, 80%RH

Product Dimension Drawing (mm)