Closed-loop stepper motor
Easy operation, change tube rapidly. The house material is PPS (polyphenylene sulfite). 304 stainless steel rollers. HF-DZ25 pump head use 2.4mm wall thickness tube, the flow rate range is 0.211-6000ml/min. This pump head is suitable for high viscous liquid which include granule and floc. It also suitable for high pressure request. New cartridge structure design, can use the special connector, connect low cost tubing outside the pump head to save cost; also can use flexible tube clamp, meet hygiene requirement.
Characteristic
- Change the tubing easily and rapidly
- Suitable for high viscous liquid
- Use flexible tube clamp
Industry application
High viscous liquid (include granule and floc)
It is also suitable for high pressure request
Tubing Installation Procedure
- A. Lift both side levers, take off the upper block.
- B. Put the tubing with cartridge or connector into pump housing.
- C. Install the upper block, put down the levers to lock the block.
Pump Head and Flow Rate
| Model No. | Housing Material Base | Protective cover | Tubing sizes | IDxWall Thickness | Speed range (rpm) | Flow Rate (ml/min) | Weight (kg) |
|---|---|---|---|---|---|---|---|
|
HF-DZ25-3L |
PPS |
PP |
15# |
4.8x2.4 |
0.1-600
|
0.211~1264 |
0.5
|
|
HF-DZ25-3L |
PPS |
PP |
24# |
6.4x2.4 |
0.1-600
|
0.385~2310 |
0.5
|
|
HF-DZ25-3L |
PPS |
PP |
35# |
7.9x2.4 |
0.1-600
|
0.508~3050 |
0.5 |
|
HF-DZ25-3L |
PPS |
PP |
36# |
9.6x2.4 |
0.1-600
|
0.6~3600 |
0.5 |
| Model No. | OEM-B501 |
|---|---|
|
Speed range |
0.1-600rpm |
|
Speed control |
Digital knob (Optional) |
|
Display |
OLED (Optional) |
|
Control method |
Toggle switch control star and stop, direction (optional) |
|
External control start and stop |
Switch signal (default 5V) |
|
External control speed |
0-5V, 4-20mA (standard), 0-10V (optional) |
|
Communication interface |
RS485 (Modbus protocol, RTU mode) |
|
Motor type |
57 Closed-loop stepper motor |
|
Working environment |
0-40ºC, 80%RH |
Product Dimension Drawing (mm)
